top of page

Group

Public·12 members

Reset Your Epson PM 245 Printer with Free Software and Avoid Service Required Error



How to Fix Epson PM 245 Service Required Error with Free Software




If you own an Epson PM 245 printer, you may encounter a service required error message on your screen. This error indicates that your printer's waste ink pad counter has reached its limit and needs to be reset. If you ignore this error, your printer may stop working or damage your print head. Fortunately, you can fix this error with a free software called Epson PM 245 Resetter or Adjustment Program. In this article, we will show you how to download and install this software, how to use it to reset your waste ink pad counter, and how to prevent this error from happening again in the future.




epson pm 245 service required software free download 1



What is Epson PM 245 Service Required Error?




Epson PM 245 is a photo printer that uses inkjet technology to print high-quality photos. Like any other inkjet printer, it has a waste ink pad that collects the excess ink that is used for cleaning the print head. Over time, this waste ink pad becomes saturated and needs to be replaced or cleaned. However, most users are not aware of this maintenance task and continue to use their printer until they see a service required error message on their screen.


The service required error message is a warning that your printer's waste ink pad counter has reached its maximum value and needs to be reset. The waste ink pad counter is a number that keeps track of how much ink has been used for cleaning the print head. When this number reaches a certain limit, the printer assumes that the waste ink pad is full and stops working. This is a safety measure to prevent the waste ink from overflowing and damaging your printer or your desk.


Causes of Epson PM 245 Service Required Error




The main cause of Epson PM 245 service required error is the accumulation of waste ink in the waste ink pad. This can happen due to various reasons, such as:



  • Using your printer frequently or for a long time



  • Printing high-resolution or borderless photos



  • Cleaning the print head often or using the automatic cleaning function



  • Using low-quality or incompatible ink cartridges



  • Exposing your printer to dust, humidity, or extreme temperatures



Symptoms of Epson PM 245 Service Required Error




When your printer's waste ink pad counter reaches its limit, you may notice some symptoms that indicate a service required error, such as:



  • A red light blinking on your printer



  • A message on your printer's LCD screen saying "Service required" or "Parts inside your printer are near the end of their service life"



  • A message on your computer screen saying "A printer's ink pad is at the end of its service life. Please contact Epson support"



  • A decrease in print quality or speed



  • An inability to print or scan anything



Risks of Epson PM 245 Service Required Error




If you ignore the service required error message and continue to use your printer , you may face some risks that can affect your printer's performance or lifespan, such as:



  • The waste ink pad may overflow and leak ink onto your printer or your desk, causing stains or damage



  • The waste ink may clog the print head or the ink tubes, resulting in poor print quality or no print at all



  • The waste ink may corrode the internal parts of your printer, leading to malfunction or failure



  • The waste ink may pose a health or environmental hazard if it comes into contact with your skin or eyes, or if it is disposed of improperly



Therefore, it is important to fix the service required error as soon as possible and avoid using your printer until you do so.


How to Download and Install Epson PM 245 Service Required Software




One of the easiest and cheapest ways to fix the service required error is to use a free software called Epson PM 245 Resetter or Adjustment Program. This software can reset your waste ink pad counter and clear the service required error message. You can download and install this software by following these steps:


Step 1: Download Epson PM 245 Resetter or Adjustment Program




You can download the Epson PM 245 Resetter or Adjustment Program from various websites that offer it for free. However, you should be careful and choose a reliable and safe source, as some websites may contain viruses or malware that can harm your computer. One of the trusted websites that you can use is [Epson Resetter], which provides the resetter for various Epson printer models. To download the resetter from this website, you need to:



  • Go to [Epson Resetter] and scroll down to find Epson PM 245 in the list of printer models



  • Click on the "Download" button next to Epson PM 245 and wait for the download to start



  • Save the file in a location that you can easily access, such as your desktop or downloads folder



Step 2: Extract and Run the Epson PM 245 Resetter or Adjustment Program




The file that you downloaded is a compressed file that contains the resetter software and some instructions. You need to extract this file before you can use it. To extract the file, you need to:



  • Right-click on the file and select "Extract All" from the menu



  • Choose a destination folder where you want to extract the files, such as your desktop or downloads folder



  • Click on "Extract" and wait for the extraction to finish



  • Open the destination folder and double-click on the file named "AdjProg.exe" to run the resetter software



Step 3: Select Your Printer Model and Port




When you run the resetter software, you will see a window with some options. You need to select your printer model and port from these options. To do so, you need to:



  • Click on the "Select" button at the top right corner of the window



  • Select "PM-245" from the drop-down menu under "Model Name"



  • Select "Auto Selection" from the drop-down menu under "Port"



  • Click on "OK" to confirm your selection



Step 4: Click on Sequential Adjustment Mode




The next step is to click on the "Sequential Adjustment Mode" button at the bottom right corner of the window. This will open another window with some options. You need to select "Waste Ink Pad Counter" from these options. To do so, you need to:



  • Click on the "Sequential Adjustment Mode" button at the bottom right corner of the window



  • Select "Waste Ink Pad Counter" from the list of options on the left side of the window